CGJLP - 1686 PROPRIETARY CHEMICAL M

  • MSDS: CGJLP
  • Manufacturer: ABBOTT LABORATORIES
  • Product Name: 1686 PROPRIETARY CHEMICAL M
  • National Stock Number: 6850-00F055598
Product Identification

Product ID:1686 PROPRIETARY CHEMICAL M
MSDS Date:06/01/1997
FSC:6850
NIIN:00F055598
MSDS Number: CGJLP

Responsible Party
ABBOTT LABORATORIES
1 ABBOTT PARK RD
ABBOTT PARK, IL 60064-3500
US

Emergency Phone: 708-937-6100

Info Phone: 708-937-6100

Cage: 4W445

Contractor
TAP PHARMACEUTICALS
DEERFIELD, IL 60015 US

Telephone: 800-621-1020

Cage: 0MRZ6

Ingredients

TRADE SECRET COMPONENT

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: OVEREXPOSURE CAN CAUSE
LUNG & THROAT IRRITATION. MAY BE HARMFUL. EYES/SKIN: MAY CAUSE
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR; GIVE CPR/OXYGEN IF
NECESSARY. EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS.
SKIN: FLUSH W/PLENTY OF WATER. INGESTION: FLUSH OUT MOUTH W/WATER,
ENSURING RINSE ISN'T SWALLOWED. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Extinguishing Media:WATER SPRAY/FOG, ALCOHOL TYPE/ALL PURPOSE TYPE
FOAMS FOR LARGE FIRES. SMALL FIRES: CO2/DRY CHEMICAL.
Fire Fighting Procedures:DON'T SPRAY A SOLID STREAM OF WATER/FOAM
DIRECTLY INTO HOT BURNING LIQUID, MAY CAUSE FROTHING. USE SCBA &
PROTECTIVE CLOTHING TO PREVENT SKIN & EYE CONTACT.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

Accidental Release

Spill Release Procedures:WEAR SUITABLE PROTECTIVE EQUIPMENT. PREVENT
RUN-OFF FROM ENTERING DRAINS, SEWERS & STREAMS. LEAKS MAY BE
COLLECTED W/ABSORBENT MATERIALS. LARGE SPILLS: USE NIOSH-APPROVED
SELF CONTAINED BREATHING APPA RATUS.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT & FLAME.
Other Precautions:PRODUCT RESIDUE MAY REMAIN ON/IN EMPTY PACKAGE.
PRECAUTIONS FOR HANDLING THE PRODUCT MUST BE USED IN HANDLING THE
EMPTY PACKAGE & RESIDUE. CLEAN BEFORE REUSING/ALTERING PACKAGE.
AVOID INHALATION & SKI N CONTACT.

Exposure Controls

Respiratory Protection:USE AN APPROPRIATE NIOSH-APPROVED HEPA
RESPIRATOR.
Ventilation:LOCAL EXHAUST; MECHANICAL (GENERAL): AT LEAST TEN AIR
CHANGES PER HOUR FOR GOOD GENERAL ROOM VENTILATION.
Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:350.6F
Appearance and Odor:WHITE POWDER

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, ACID ANHYDRIDES, ACID CHLORIDES, OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, FLAME
Hazardous Decomposition Products:CO, CO2, NITROGEN OXIDES & HYDROGEN
CHLORIDE GAS

Disposal

Waste Disposal Methods:DISPOSE OF BY INCINERATION IN ACCORDANCE
W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.